Measure first: the 900x400mm footprint decides everything
The Glare Bear Desk Mat is listed at 900x400mm, which is the only size the catalog confirms. Before you order, measure your desk's usable depth and width, then subtract room for monitor stands, speakers, or a laptop riser that will sit on top of the mat. A mat that overhangs the front edge will curl or slide; one that crowds your monitor base leaves less usable mouse space than the number suggests.
If your desk is shallower than the mat's depth, you have two honest options: let the mat overhang at the back where nothing presses on it, or choose a smaller mat. The catalog does not list a smaller Glare Bear size, so the 900x400mm version is the one to plan around.
What the catalog confirms
- Glare Bear - Desk Mat: 900x400mm This is the full footprint you need to fit on your desk; it covers both a keyboard and a wide mouse-swing area.

Glare Bear - Desk Mat - Glare Bear - Desk Mat: Excellent as a cover for your desk or as an extra-large mousepad. The mat is intended for full-desk coverage or as one large mouse surface, not as a small wrist pad.
- Glare Bear - Desk Mat: Featuring artwork from our favorite IPs and artists. The printed top is the visual centerpiece, so setup and cleaning should protect the artwork.
Set up the mat for mouse and keyboard use
The catalog does not specify surface material, thickness, or edge stitching, so treat the following as general setup order rather than manufacturer instructions. Check each step against how the mat actually behaves on your desk.
- Clear and clean the desk: Remove dust and grit before laying the mat down; trapped particles under a large mat can mark the desk or the underside.
- Place the artwork where you want it: Because the mat is 900x400mm, you can position the printed design toward the front or back of the desk. Decide before you load the keyboard on top.
- Put the keyboard down first: Center the keyboard on the mat, then check that your mouse hand still has room to move without leaving the mat's right edge.
- Test the mouse area: The catalog calls the mat an extra-large mousepad, but it does not confirm surface glide. Try your mouse on the printed area and adjust sensitivity or mouse position if tracking feels inconsistent.
- Check for overhang and curl: If the mat hangs over the desk edge, move it back. A mat that is not fully supported can lift at the edge and interfere with mouse movement.
What the catalog does not confirm about the surface
The supplied record lists no material, thickness, stitched edge, or water-resistance information for the Glare Bear Desk Mat. That means you should not assume it is machine-washable, spill-proof, or compatible with a particular mouse sensor without testing. If you need a mat with confirmed stitched edges or a specific surface texture, ask before ordering rather than inferring from the artwork description.
For a gaming desk mat surface, the practical test is simple: move your mouse in slow circles and fast flicks across the printed area. If the cursor jumps or the mat bunches under your wrist, adjust the mat's position or your mouse settings. The catalog does not provide a break-in period, so do not assume one.
A conservative cleaning routine for a printed desk mat
No care instructions are supplied for this product. The routine below is deliberately cautious and avoids methods the catalog does not support. When in doubt, test on a small corner first.
- Dust regularly: Wipe with a dry or slightly damp soft cloth to lift crumbs and dust before they work into the print.
- Spot clean rather than soak: For a mark, use a barely damp cloth with mild soap and blot the area. Do not saturate the mat, because the catalog does not confirm water resistance.
- Avoid harsh chemicals: Skip bleach, ammonia, and abrasive pads; the catalog gives no evidence they are safe for the printed surface.
- Dry flat and fully: Let the mat air-dry flat before putting the keyboard back on it. Do not machine wash or tumble dry, as no care instructions are supplied.
Everyday habits that protect the print
Keep drinks on a coaster away from the mat's edge, and avoid eating over the keyboard area where crumbs fall onto the print. If you use a wrist rest, check that it does not trap grit against the mat. Rotate the mat occasionally if your desk layout allows, so wear falls on different parts of the artwork rather than one spot.
When you move the mat, lift it rather than sliding it across the desk; sliding can drag dust underneath and scratch the desk finish. If you store the mat, roll it loosely rather than folding it, since the catalog does not confirm how the printed surface responds to creasing.
When the 900x400mm Glare Bear is the wrong choice
Skip this mat if your desk is too shallow to support its depth, if you need confirmed spill protection or a specific stitched edge, or if you prefer a small mousepad that leaves most of the desk bare. The Glare Bear Desk Mat is best suited to a desk where the full 900x400mm area can sit flat and the artwork can be the visual anchor of the setup.


