Lock In Desk Mat: Surface, Sizing and Daily Care Tips
By Starforge Systems | Custom Gaming PCs | Published: 2026-11-03
Category: Product Reviews
Get the most from the Lock In - Burnt Peanut Desk Mat with a sizing check, surface setup and a simple daily cleaning routine that protects the print.
Quick answer
Treat the Lock In - Burnt Peanut Desk Mat as a 900x400mm surface first: confirm the footprint fits your desk and mouse space, then keep the printed side clean with gentle, regular wiping. A quick weekly routine protects the artwork and keeps the surface consistent for gaming.
What the 900x400mm footprint means for your desk
The Lock In - Burnt Peanut Desk Mat measures 900x400mm, which is wide enough to sit under a keyboard and mouse while covering a good portion of a standard desk. Before placing it, measure your desk depth and the space your mouse needs to move. If your desk is shallow or you use a very low-sensitivity mouse setting, check that the mat leaves enough room for your arm without hanging over the edge.
Because the mat is also described as an extra-large mousepad, it can replace a separate mousepad. That reduces clutter but means the entire surface needs to stay clean and flat for consistent mouse tracking.
Surface setup: flat, dry and free of grit
A printed desk mat performs best on a clean, dry desk. Wipe the desk first so dust and crumbs do not get trapped under the mat, then lay the mat printed side up. If the mat arrives with a slight roll, give it time to settle rather than forcing it flat with heavy objects that could crease the print.
Avoid placing the mat over an uneven surface or directly on top of cables. Small bumps under the mat can create high spots that affect mouse movement and put uneven pressure on the printed layer.
Daily care that protects the print
The most common mistake with anime desk mat care is aggressive cleaning. The Lock In mat features artwork, so treat the printed side gently: wipe away dust and light marks with a soft, slightly damp cloth, and avoid scrubbing or soaking the mat. For deeper cleaning, use a mild soap and water solution on a cloth rather than pouring liquid directly onto the surface.
Keep drinks and snacks away from the mat where possible. Crumbs and sticky residue are easier to prevent than to remove from a printed surface. If something spills, blot it up promptly instead of rubbing it in.
When the mat is not the right fit
If your desk is smaller than 900x400mm or you need a mat that can be rolled up and stored frequently, this size may be more surface than you want. The catalog does not list thickness or material details, so if those factors are critical for your setup, check the product page or contact support before ordering. The Lock In mat is best suited to a fixed desk where the artwork can stay visible and the surface can be maintained regularly.
Step-by-step: set up and care for your Lock In desk mat
- Measure your desk and mouse space: Use a tape measure to confirm your desk is at least 900mm wide and 400mm deep in the area where the mat will sit. Leave extra room for your mouse to move without dropping off the mat. If the mat would overhang the desk edge, consider a smaller mat or a different desk layout.
- Clear and clean the desk surface: Remove dust, crumbs and sticky residue from the desk before placing the mat. A dry or slightly damp cloth is enough; let the desk dry fully. Trapped grit under the mat can scratch the desk and create uneven spots that affect mouse tracking.
- Lay the mat flat and let it settle: Place the mat printed side up and smooth it with your hands. If it arrived rolled, leave it flat for a few hours rather than weighting the edges. Avoid stacking heavy objects on the printed side, which can leave lasting impressions.
- Wipe the surface weekly: Use a soft, lint-free cloth lightly dampened with water to wipe away dust and light marks. Work in gentle circles and avoid pressing hard on the artwork. Do not use paper towels or abrasive sponges, which can dull the print.
- Handle spills immediately: Blot liquids with a dry cloth, then wipe with a cloth dampened with mild soap and water. Rinse the cloth well and wipe again with clean water. Never soak the mat or pour cleaner directly on it; moisture can seep into the edges.
- Store or move the mat with care: If you need to move the mat, roll it loosely with the printed side facing outward. Store it flat or loosely rolled in a dry place. Tight rolling or folding can crease the print and leave permanent marks.
Product facts
- Lock In - Burnt Peanut Desk Mat: 900x400mm footprint. Covers a keyboard and mouse area while fitting most standard desks; measure your space to confirm it leaves room for mouse movement.
Lock In - Burnt Peanut Desk Mat - Lock In - Burnt Peanut Desk Mat: Artwork from favorite IPs and artists. The printed surface is a visual feature, so clean it gently to avoid fading or scratching the design.
- Lock In - Burnt Peanut Desk Mat: Works as a desk cover or an extra-large mousepad. You can use it in place of a separate mousepad, but the whole surface then needs regular cleaning for consistent tracking.
