What The Red Gate Platelight Is For
The Red Gate is an acrylic panel designed to sit inside your computer case and diffuse light from a compatible Starforge Systems Platelight. The result is a backlit piece of art that adds a custom, illuminated look to your gaming build. Because the acrylic itself does not produce light, you need a Platelight behind it to achieve the glow shown in product images.
What You Get with The Red Gate
- The Red Gate: Made of high quality, durable acrylic, these panels allow light from our Platelight to diffuse through, creating a gorgeous backlit piece of art, right inside of your computer. The acrylic material is built to last and designed specifically to work with Starforge Systems Platelights, so you get even light spread without hot spots.

The Red Gate
How to Set Up The Red Gate Inside Your PC
Start by choosing a mounting spot inside your case where the panel will be visible through a side window or open panel. The Red Gate is a flat acrylic piece, so it works best mounted on a flat surface such as a PSU shroud, a fan bracket, or a dedicated panel mount. Secure the panel using the same method as other acrylic Platelight panels—typically with included screws, standoffs, or adhesive strips (check your Platelight bundle for the exact hardware).
Once the panel is in place, attach the Platelight behind it. The light source should sit directly behind the acrylic so the light diffuses evenly across the design. If your case has limited clearance, test the fit before finalizing the mount. Bundle The Red Gate with a compatible Platelight to complete the set.
Lighting and Placement Tips for a Clean Look
For the best visual effect, position the Platelight so it fully covers the back of the acrylic. If the light source is smaller than the panel, you may see uneven brightness on the edges. Consider placing The Red Gate in a spot where it gets airflow from case fans—this helps keep the acrylic dust-free and prevents heat buildup from the Platelight.
The Red Gate works well as a focal point inside a mid-tower or full-tower case. You can also use it as desk accent lighting by mounting the panel and Platelight in a separate acrylic stand, though the intended use is inside the PC.
Caring for the Acrylic Surface
- Dust regularly: Use a soft, dry microfiber cloth to gently wipe the acrylic surface. Avoid paper towels or rough fabrics that can scratch the panel.
- Clean smudges carefully: If fingerprints or grease appear, lightly dampen the cloth with water or a mild acrylic cleaner. Never spray liquid directly onto the panel; always apply to the cloth first.
- Avoid harsh chemicals: Solvents like acetone, alcohol, or ammonia-based cleaners can damage the acrylic surface and the printed design. Stick to water or a dedicated plastic polish.
What the Catalog Does Not Confirm
The supplied product information does not include exact dimensions, weight, or mounting hardware details for The Red Gate. If you need precise measurements to confirm case compatibility, check the product listing or contact Starforge Systems support. The care steps above are based on general acrylic best practices, not on specific instructions from the manufacturer.


